PLC Control Automatic Tire Curing Chamber / Vulcanizing Tank Saving Energy

Saving Energy Automatic Curing Chamber For OTR Retreading Equipment

Specifications

1. Cold feed extrusion
2. Automatic constant temperature and preheating system
3. PLC automatic control
4. High winding speed

OTR tire retreading extrusion winding machine

1. Cold feed extrusion
2. Automatic constant temperature and preheating system
3 .PLC automatic control
4. High winding speed

Feature:

1. Automatic PLC control with high winding speed, about 2-5 mines per tyre

2. Automatic measure tyre thickness and tread width

3. Automatic constant temperature, preheating system, with high jointing density, without pores

4. Retread tyre will be in high stability

There are two techniques for retreading:

Hot retreading AND Precure "cold" retreading.

The benefits of retreading are that it is both saving energy and environment protection!
1. When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".

2. To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tonnes per year!

3. To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 liters of oil are needed.

old tyre retreading machine

tire curing chamber

PLC Control Automatic Tire Curing Chamber / Vulcanizing Tank Saving Energy Images